An HDR skipper image sensor with lateral overflow gate-coupled capacitor

A skipper image sensor (SIS) with lateral overflow gate-coupled capacitor (LOGCC) is proposed in this work. During the integration period, the transfer gates after TG are switched on to construct a LOGCC with specific operation timing. Once high light illumination fully charges the pinned photodiode (PPD), the extra photogenerated electrons will overflow to LOGCC, which effectively improve the dynamic range (DR) of SIS. Before the readout of signal in PPD, the electrons stored in LOGCC are sampled and then reset through the floating diffusion (FD). In the end, the electrons in PPD are sampled by the method of the conventional skipper pixels. According to TCAD simulation results, the extra electrons are transferred to LOGCC through the TG effectively. Measurement of prototype chip shows that the DR is extended to 89.3 dB. As contrast, the DR is 66 dB when switching off the transfer gates, i.e. LOGCC. Compared with traditional SIS, the proposed architecture achieved DR extension by introducing LOGCC which is constructed with transfer gates. Therefore, this study proposes the introduction of LOGCC to expand the application scenarios of SIS, providing a new approach for its use in conditions requiring stronger light.