Answers are grounded in this paper and cite their sources.
This article presents a low-profile dual-polarized phased array antenna featuring an improved feed structure and a multiresonant wide-angle impedance matching (WAIM) layer for satellite-assisted Internet-of-Things (SATA-IoT) vehicular communications across the L-, S-, C-, and X-bands. First, an improved feed structure based on a double-sided multi-notch balun (DMB) is developed to provide stable impedance transformation and tailored field distribution, thereby enhancing impedance matching in the low- and mid-frequency bands. Second, a planar nonuniform metasurface (PNM)-based multiresonant WAIM layer is introduced. By properly engineering its effective permittivity and permeability, two desired resonances together with inductive coupling are achieved, enabling wide-angle scanning performance in the high-frequency band. These two key techniques jointly allow the proposed array to realize ultrawide bandwidth, wide-angle scanning capability, and a low-profile configuration. To validate the design, a 5×5 prototype was fabricated and measured. The measured results show a 9:1 impedance bandwidth from 1.4 to 12.6 GHz. In particular, both array configurations exhibit an active VSWR below 3 at broadside, and maintain active VSWR below 3.3 for scan angles up to ±70° across the entire operating band. The overall profile is only 0.075 λlow. These results demonstrate that the proposed array is a promising candidate for SATA-IoT and related vehicular IoT communication systems.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: