Answers are grounded in this paper and cite their sources.
This paper presents a design process for a 4 kW class interior permanent magnet synchronous motor (IPMSM) for semiconductor vacuum pumps. Based on a conventional induction motor, inverter voltage, current density, and slot fill factor limits are established. Four pole-slot combinations (6/9, 8/12, 10/15, and 12/18) are evaluated at a fixed pole-to-slot ratio of 2:3. For each combination, the electric-to-magnetic loading ratio is adjusted to minimize current density. The stator outer diameter and stack length are then systematically adjusted within the design constraints to determine minimum-volume candidates. Considering electromagnetic performance and inverter limitations, the 8-pole/12-slot design is selected and refined through rotor and stator geometry optimization to reduce cogging torque and torque ripple. Finite element analysis shows a shaft output of 4.46 kW and an efficiency of 96.42 %, with a 60.1 % reduction in stator-envelope volume relative to the reference induction motor.
No takes yet. Share an insight, caveat, or question.
Ko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: