Answers are grounded in this paper and cite their sources.
A modular multilevel converter (MMC) consists of a large number of submodules, each containing an embedded controller whose firmware needs to be updated as needed. Conventional wired programming methods, such as JTAG-based individual programming, become increasingly inefficient as the number of submodules grows, resulting in increased maintenance time and wiring complexity. In large-scale MMC systems, individually connecting each submodule controller via wired interfaces not only prolongs the update procedure but also increases the risk of human error during maintenance. This paper proposes a Wi-Fi-based wireless firmware download system for MMC submodule controllers based on a dual-core DSP(Digital Signal Processor). The proposed system adopts a hierarchical communication structure consisting of a host PC, a fixed wireless access point (AP) installed inside the converter panel, Wi-Fi modules, and DSP controllers. Firmware images are transmitted wirelessly via TCP/IP, and a group-based sequential download method is applied to distribute network load and ensure communication stability under large-scale deployment. A custom bootloader and flash kernel are implemented on the DSP to perform reliable flash erasing, programming, and verification with checksum-based integrity checking at each stage. The system supports independent firmware download for dual-core CPU1 and CPU2, and provides real-time status monitoring including connection state, firmware version, and download progress through a graphical HMI(Human-Machine Interface). Experimental results confirm that the proposed system enables reliable and efficient wireless firmware updates, significantly reducing maintenance procedures compared to conventional wired methods.
No takes yet. Share an insight, caveat, or question.
Byun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: