Answers are grounded in this paper and cite their sources.
Conventional waterflooding often results in limited oil recovery, highlighting the need for more effective enhanced oil recovery (EOR) methods. Low-salinity water (LSW) injection improves oil recovery through wettability alteration, while associated gas injection offers operational and economic advantages. However, previous low-salinity water alternating gas (LSWAG) studies have mainly focused on CO 2 , and the application of produced associated gas remains largely unexplored. This study investigates low-salinity water alternating associated gas (LSWAAG) injection as a hybrid EOR technique. Wettability alteration was evaluated using contact angle measurements, and displacement performance was assessed through core flooding experiments under reservoir conditions. Contact angle measurements showed a 41.4% reduction in contact angle using ten-fold diluted seawater (10DSW), indicating a pronounced shift toward more water-wet conditions. Core flooding experiments demonstrated that the LSWAAG process using 10DSW achieved an oil recovery of 82.59%, representing 14.03% points higher recovery than low-salinity water flooding (10DSW) and 7.96% points higher recovery than seawater alternating gas (SWAG) injection. The contact-angle measurements indicate wettability alteration as a potential contributor to the improved recovery observed during LSWAAG injection. Unlike previous LSWAG studies based primarily on CO 2 , this work experimentally demonstrates the feasibility of integrating produced associated gas with low-salinity water, providing a technically effective, operationally attractive, and environmentally beneficial hybrid EOR strategy while promoting the utilization of associated gas that would otherwise be flared.
No takes yet. Share an insight, caveat, or question.
Nejad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: