Answers are grounded in this paper and cite their sources.
Assessing hydrodynamic parameters in photobioreactors (PBR) is essential for optimised operation, yet computational fluid dynamics studies specifically evaluating shear stress properties remain scarce. This study utilises COMSOL Multiphysics® to provide novel quantitative insights into the hydrodynamic performance of a 15 L conventional flat-panel photobioreactor. A 2D time-dependent turbulent bubbly-flow model based on the Euler-Euler approach was implemented and validated against an airlift PBR (ALR) system, with a margin of error of less than 3%. Fluid flow, shear stress, and mixing behaviour were systematically investigated under aeration rates ranging from 0.1 to 1.0 vvm. Results demonstrated that while increasing aeration improved hydrodynamic parameters, average liquid velocities consistently remained below 0.02 m/s, indicating the persistent presence of dead zones near the vessel walls. Crucially, simulated shear stress remained below the 1.2 Pa critical threshold for microalgal cell damage. However, the 0.2 Pa threshold required to inhibit biofilm formation was only exceeded at aeration levels above 0.4 vvm. While higher aeration increased average turbulent kinetic energy and turbulent energy dissipation, their distribution remained non-uniform, with peak turbulence concentrated near the sparger and upper sections. These findings suggest an optimal aeration range of 0.2 to 0.6 vvm to balance mixing efficiency and shear control. Ultimately, this work delivers novel quantitative mapping of critical hydrodynamic regions, advancing the predictive basis for reactor scale-up and design optimisation.
No takes yet. Share an insight, caveat, or question.
Nuri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: