Answers are grounded in this paper and cite their sources.
UAV-based direct seeding can establish crops where ground machinery is difficult to operate, but consistent seed metering and placement remain challenging. This study calibrated and bench-evaluated a three-unit, encoder-driven seed-metering system mounted on a hexacopter adapted from a direct-seeded-rice platform for soybean. The target was 60 kg ha⁻¹ at 6 cm intra-row and 30 cm inter-row spacing over the 0.90 m three-row working width. Calibration over 21–90% rotor settings gave a linear relationship between rotor setting and application rate (R² = 0.997), and a setting of about 40% delivered the target rate at 1.0 m s⁻¹. Seed placement was evaluated on a motorised sticky belt running at 1.0 m s⁻¹ with rotor settings of 35, 40 and 45% and release heights of 5, 10, 15 and 20 cm. Quality of feed index (QFI) ranged from 58.6 to 78.8%, but neither factor significantly affected the proportions of acceptable, missed or multiple spacings. Two-way ANOVA also showed no significant effect of either factor, or their interaction, on log-transformed seed spacing. Release height, however, significantly affected mean absolute lateral displacement (P < 0.001). Pooled over rotor settings, seeds within ±2 cm of the row centre fell from 93.8% at 5 cm to 57.8% at 20 cm. Seed-discharge calibration and aerial seed placement should therefore be evaluated separately. Under laboratory conditions, the 5 cm release height gave the tightest cross-row placement without a measurable loss in along-row quality.
No takes yet. Share an insight, caveat, or question.
Chaudhary et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: