Answers are grounded in this paper and cite their sources.
Arcing current faults (ACFs) occurring in a medium-low voltage3φtransformer represent a challenge for transformer protection. Such faults initiate currents with different features from those triggered by conventional faults, thus making it difficult for transformer protection to accurately detect and respond to arcing current faults. This paper proposes a method for accurate detection and identification of arcing current faults in MV-LV transformers. The presented method is based on extracting the magnitudes and phases of low frequency harmonics from the differential currents. Unlike magnetizing inrush and conventional fault currents, arcing current faults trigger currents that have harmonic components with non-stationary phases. These non-stationary phases can provide signature information of arcing current faults. Multi-channel filters can accurately extract harmonic components with complex time-frequency characteristics, including non-stationary phases. In this paper, a multi-channel filter bank that is used to extract harmonic components with non-stationary phases as a signature of ACFs on the low-voltage side of a medium-low voltage3φtransformer. The used filter bank is composed of digital bandpass finite impulse response filters, each of which has a linear phase over a wide frequency range. The non-stationary phase method is tested during various fault and non-fault events. Test results demonstrate protection responses with speed, accuracy, and reliability against ACFs. Observed response features are found to have minor sensitivity to the level of loading level and/or type of the ACFs.
No takes yet. Share an insight, caveat, or question.
Saleh et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: