Answers are grounded in this paper and cite their sources.
In the present study, the prediction model for compressive strength of plain weave fabric reinforced composites (PWFCs) is developed using an analytical solution for a three-layer laminate [0°/90°/0°] under uniaxial compression (σ x only) and biaxial compression (σ x /σ y = 2/1) conditions. Results are compared with tensile strength predictions from previous studies, and both Tsai-Hill and Tsai-Wu failure criteria are applied and benchmarked against literature values. The results revealed that for the [0°/90°/0°] layup, all compressive loading cases are governed by transverse matrix crushing in the 90° ply. The uniaxial compressive strength (136–144 MPa) is only 22–23% of the tensile strength (617 MPa). This large tension–compression asymmetry arises from the low transverse compressive strength (140 MPa) combined with stress concentration in the 90° layer. Further, under biaxial compression, failure occurs at just 28–33 MPa — a 77–80% reduction from uniaxial compressive strength and a 95% reduction from the tensile benchmark. Tsai-Wu predicts 5–14% lower failure loads than Tsai-Hill under compressive loading. The [0°/90°/0°] stacking is poorly optimized for compressive or biaxial loading; incorporating ±45° plies is recommended to improve biaxial compressive performance.
No takes yet. Share an insight, caveat, or question.
Yusuf Şahin (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: