Answers are grounded in this paper and cite their sources.
Noise pollution is a major problem in industrial and urban environments. Artificial stone has suitable mechanical properties but its acoustic performance can be limited. This study evaluated the effects of recycled polypropylene fibers and metallic fiber waste on the sound absorption performance of artificial stone. Response Surface Methodology was used to investigate polypropylene fiber content metallic fiber content and sample thickness. Fiber contents ranged from 0 to 28 percent and sample thickness ranged from 1 to 5 cm. Twenty experimental runs and five control samples without fibers were prepared. Sound absorption was measured using a two microphone impedance tube according to ISO 10534-2. Polypropylene fiber content had an important effect on sound absorption especially in the middle and high frequency ranges. Increasing polypropylene fiber content from 0 to 28 percent increased the mean sound absorption coefficient from 0.185 to 0.55 in the middle frequency range under fixed metallic fiber content and thickness. Metallic fibers showed a nonuniform effect that depended on the combination of variables. Two samples with different thicknesses showed very similar high frequency sound absorption coefficients of 0.528 and 0.5257. Surface porosity alone did not explain the acoustic response. The results indicate that recycled polypropylene and metallic fiber waste can be used to modify the acoustic performance of artificial stone when fiber content and sample thickness are appropriately selected.
No takes yet. Share an insight, caveat, or question.
Farhadi et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: