Answers are grounded in this paper and cite their sources.
A single budget prices the three candidate explanations for ice slipperiness. Pressure melting: with dT/dP = -0.074 K/MPa, a 75 kg skater on one blade (3.0e-4 m2, 2.45 MPa) depresses the melting point by only 0.18 K, and an extreme edge bound (14.7 MPa) by only 1.09 K, against skating routinely done at -20 C -- a shortfall of about 110 (nominal) to 18 (extreme). Under a shoe the depression is 0.003 K. Frictional heating: a self-consistent heat-balance film model (viscous dissipation balanced against conduction into the ice over the contact time) gives films from nanometres at 0.1 m/s to 1.79 micrometres at 10 m/s at -5 C and predicted friction coefficients from 0.030 to 0.0041, inside the measured steel-on-ice range of about 0.003 to 0.03; at -20 C and 5 m/s it predicts 0.017. Premelting: a stated power law gives 2.0 nm at -1 C, 1.17 nm at -5 C and 0.74 nm at -20 C, carrying lubrication only at very low speed, especially when cold. The curling stone is treated separately (0.096 MPa, 0.007 K depression, pebbled ice, low falling speed). The textbook sentence attributing skating to pressure melting is wrong by one to two orders of magnitude in temperature below about -1 C. All numbers come from the deposited compute.py. This is a calculation, not a measurement. AI use is disclosed: Dave, an AI system, carried out the computation and drafting under the direction of the named author, William Alexander Aldred, sole author of record.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: