Answers are grounded in this paper and cite their sources.
The abrasive wear of A297-HH heat-resistant stainless steel casting grate bars used to transport iron ore pellets in pelletizing furnaces was investigated. The grate bars operate under severe conditions, experiencing high temperatures and wear due to contact with the pellets. Microstructural analyses via metallography and Energy Dispersive Spectroscopy (EDS) identified chromium carbides (Cr23C6) and austenite, consistent with predictions from Thermo-Calc® software. Linear scratch tests were carried out using diamond and synthetic hematite Rockwell C indenters, applying progressive normal loads ranging from 0.2 to 10 N. Pin-on-disc wear tests were also performed to evaluate the tribological performance, using a synthetic hematite counter body to simulate real-world operating conditions. The predominant wear micromechanisms included micro-gouging and micro-cutting, with coefficients of friction ranging from 0.65 to 0.68 in the pin-on-disc tests. At 150°C in the pin-on-disc test, no mass loss was observed; instead, material transfer resulted in mass gain. The increase in microhardness in the wear tracks indicated surface work hardening. The results provide insights into wear mechanisms and material performance under different conditions, contributing to improved material selection and operational strategies.
No takes yet. Share an insight, caveat, or question.
Cremonini et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: