Answers are grounded in this paper and cite their sources.
The mechanical properties of DLC films are strongly process dependent, yet the ionization fraction of the carbon plasma, a key parameter, remains difficult to control independently in experiments. Here, classical molecular dynamics simulations with a dual-energy incident flux of 70 eV ions and 5 eV neutrals were used to investigate how the ionization fraction governs the growth of hydrogen-free DLC films over the full 0 to 100% range. Because the energy of each species is fixed and only their ratio is varied, the ionization fraction is isolated as a single variable, which a mono-energetic beam cannot provide. At 0% ionization, adsorption-dominated growth yields a sp2-rich structure with a tensile stress of +6.08 GPa. From 0% to 50%, the dominant growth mode shifts from adsorption to subplantation, and the density and the compressive stress rise concurrently while the sp3-C fraction remains essentially constant, the stress peaking at −18 GPa at 50%. Beyond 50%, further ionization produces only a marginal increase in the density and the sp3-C fraction, together with a slight relaxation of the compressive stress that is attributed to the thermal relaxation of the network under continuous ion bombardment. At full ionization, subplantation dominates and the film reaches a density of 3.09 g/cm3 and an sp3-C fraction of 33.6%, with a residual compressive stress of −16.5 GPa. The saturation observed above 50% indicates that a further increase in the ionization fraction brings little structural gain, and the results provide a quantitative relationship from which the deposition conditions can be selected according to the desired sp3-C content and the tolerable stress level.
No takes yet. Share an insight, caveat, or question.
Yi Song (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: