Answers are grounded in this paper and cite their sources.
In this study, an innovative approach has been employed to evaluate the cladding performance characteristics of medium carbon steel using super duplex stainless steel filler material.This research explores the effect of welding current, gas flow rate, and welding speed on key performance indicators such as hardness, corrosion rate, bead width, and penetration depth.The maximum hardness of 137.4 Hv, maximum bead width of 6.728 mm, maximum penetration of 2.016mm and minimum corrosion rate of 26.25 x 10-3 mils/year were observed in proposed sample.The primary objective is to establish the empirical relationship between dependent and independent variables to identify the optimal parameters for cladding process.To accomplish this, the RSM and GA optimization has been utilized for modeling and optimization, respectively.The regression models are subjected to GA optimization to identify the best dependent and independent variables were 84.95A current, 7.12 lpm gas flow rate and 74.42 mm/min weld speed.The findings demonstrate that the predicted empirical model output the experimental values validating our approach.In addition the cladding process delivers a significant contribution in the field of welding and provides valuable insights into this process.The SEM & OM analysis was carried out for optimized sample which microstructure is fine-grained also desirable for good weld quality.
No takes yet. Share an insight, caveat, or question.
Yokeswaran et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: