Answers are grounded in this paper and cite their sources.
This study compares thermal degradation and residual-mass behaviour in three cassava cortex-cow bone particulate epoxy formulations using thermogravimetric (TG) and derivative thermogravimetric (DTG) curves.The specimens comprised a hybrid with 20 vol.% each of cow bone and cassava cortex (RDT4PS100), a 40 vol.%cow-bone composite (RBT0PS100) and a 40 vol.%cassava-cortex composite (RFT4PS500).At a programmed heating rate of 10 °C/min, the estimated principal DTG peaks were approximately 400, 415 and 400 °C, respectively; associated peak mass-loss-rate magnitudes were approximately 4.2, 2.5 and 5.0%/min.Residues at the plotted endpoints were approximately 16%, 16-17% and 5%, respectively.The cow-bone-only formulation showed the smallest principal degradation-rate magnitude, whereas the hybrid and cow-bone-only specimens retained substantially more mass than the cassava-cortex-only specimen.The results distinguish peak degradation temperature, degradation-rate intensity and non-volatile residue as separate descriptors.Because particle size and treatment also differed between formulations, the observations support a descriptive formulation-level comparison rather than an isolated hybridisation effect.The findings provide preliminary thermal-characterisation evidence for selecting formulations for further engineering assessment.The comparison uses a fixed total reinforcement fraction of 40 vol.% and separates thermogram-derived evidence from possible compositional explanations.The findings are relevant to screening waste-derived reinforcement systems, but they do not establish fire resistance, mechanical retention during heating or permissible automotive service temperatures.Further matched-control measurements and replicate-level analysis are needed before those engineering properties can be assessed.
No takes yet. Share an insight, caveat, or question.
Daodu et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: