Answers are grounded in this paper and cite their sources.
Corrosion causes extensive damage to property, human life, and the environment, underscoring the urgent need for effective prevention. Hence, eco-friendly inhibitors are essential. Green corrosion inhibitors present a viable alternative, and their importance is growing from both environmental and economic standpoints. Expired Colistin Drug (ECLD) was evaluated as a green corrosion inhibitor for API 5CT P110 Steel Tubing (CS-P110) in 1 M HCl solution. Its inhibitory performance was assessed using multiple techniques, including gravimetric mass reduction (MR) measurements and electrochemical techniques, including potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and surface characterization methods such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), and atomic force microscopy (AFM). Experiments were conducted at 298, 308, 318, and 328 K, with inhibitor concentrations ranging from 10 to 50 g·L⁻ 1 . The inhibition efficiency (IE%) increased with increasing inhibitor concentration and decreased with increasing temperature, reaching a maximum of 97.1% at 50 ppm from WL measurements at 298 K. Electrochemical analysis revealed increased charge-transfer resistance (from 19 to 540 Ω·cm 2 ) and reduced corrosion current density, consistent with mixed-type inhibition. The adsorption behavior was best described by the Langmuir adsorption isotherm, while the calculated thermodynamic parameters, ΔG ads values ranged from (− 24.4 to − 26.6 kJ·mol⁻ 1 , indicative of physical and chemical adsorption, with mainly physisorption, Moreover, Density Functional Theory (DFT) calculations and Monte Carlo (MC) simulations confirmed the strong adsorption affinity of the ECLD derivatives toward the Fe (1 1 0) surface. Overall, the chemical and electrochemical findings were in good agreement, providing strong evidence that ECLD forms a protective layer on the steel surface, thereby reducing the corrosion rate of CS-P110 in acidic medium.
No takes yet. Share an insight, caveat, or question.
Motawea et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: