Answers are grounded in this paper and cite their sources.
Photovoltaic systems integrated with battery energy storage may exchange power with the utility grid through series-compensated networks. Their grid interfaces must support both rectifying operation for grid-to-storage charging and inverting operation for power export from photovoltaic generation or storage. However, interactions between conventional phase-locked-loop (PLL)-based control and series-compensated networks can cause subsynchronous resonance (SSR), limiting stable operation. This paper proposes a PLL-free controlled-impedance-source strategy that shapes the converter terminal characteristic to support bidirectional power exchange. The frequency-dependent impedance is analyzed to establish parameter-selection guidelines, and the steady-state operating points are derived to support voltage-loop design. Root-locus analysis incorporating current-measurement filtering, sampling, and delay effects evaluates the closed-loop stability under rectifying and inverting conditions. Controller-hardware-in-the-loop experiments compare the proposed strategy with conventional PLL-based control at different short-circuit ratios (SCRs) and series-compensation levels. The proposed controller maintains stable operation under tested conditions in which the PLL-based controller exhibits subsynchronous oscillations. Additional inverting-mode experiments show stable operation at SCR = 2.5 and a loss of stability following a transition to SCR = 2.0, consistent with the predicted stability limitation. These results demonstrate the applicability of the proposed strategy to bidirectional grid interfaces in series-compensated photovoltaic–storage systems within the investigated operating range.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: