Answers are grounded in this paper and cite their sources.
Scaling up continuous reactors with immobilised enzymes requires identifying the hydrodynamic variable that governs biocatalyst stability, because the design criterion for the larger unit depends on it. In this work, a packed-bed reactor with Aspergillus niger inulinase immobilised on citric acid activated Luffa cylindrica was scaled up from a working capacity of 125 mL to 415 mL, with a linear scale factor of 2.21 applied to all design dimensions. The scaled-up reactor was operated at pH 4.6 and 49 °C with flow rates of 3, 5, 7 and 11 mL min-1, equivalent to superficial velocities of 0.42 to 1.55 cm min-1 and space times of 138 to 38 min. Reducing sugars in the effluent were quantified by the 3,5-dinitrosalicylic acid method with a validated calibration (R2 = 0.991; LOQ = 164 mg L-1), and the time course of concentration was described with a first-order decay model whose confidence intervals were obtained by Monte Carlo simulation. With a feed of 1.079 g L-1 inulin, the initial apparent degree of hydrolysis was 20 to 25 % and varied little with space time (elasticity of 0.13), whereas the outlet mass rate scaled with flow rate raised to 0.87 and reached 161 mg h-1 at 11 mL min-1. The apparent decay constant revealed two regimes. At 3 and 5 mL min-1 it was 0.0065 min-1 with no difference between the two flow rates (p = 0.95), giving an operational half-life of 106 min, and at 7 and 11 mL min-1 it increased to 0.036 and 0.062 min-1 (p < 10-5). The change occurred between 0.70 and 0.99 cm min-1 of superficial velocity, was not explained by the processed volume (F = 58.0; p < 10-8) and would only vanish with a between-run variability of kd above 66 %, against an agreement of 0.9 % between the two independent runs of the stable regime. Within the common window of 5 to 30 min, the flow rate of 5 mL min-1 combined a space-time yield of 183 mg L-1 h-1 with a mean concentration of 253 mg L-1 and a substrate utilisation of 21 %, twice that at 11 mL min-1. These results establish superficial velocity as the scale-up criterion for beds of lignocellulosic support and define a stable operating window for the design of larger units.
No takes yet. Share an insight, caveat, or question.
Arcos et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: