Answers are grounded in this paper and cite their sources.
The inverse kinematics of a non-Pieper seven-degree-of-freedom rock drilling manipulator has no analytical solution. Its configuration consists of five revolute joints and two prismatic joints, which cannot be solved by arm-angle parameterization, making numerical methods an inevitable choice. However, existing numerical methods still have deficiencies in joint limit constraint handling, redundancy utilization, and cold-start initial value selection, making it difficult to satisfy the requirements of rock drilling operations. This paper systematically investigates numerical solution methods for this problem. First, a D–H kinematic model is established, and its redundancy characteristics and solving difficulties are analyzed. Subsequently, the solution performances of the pseudoinverse method, the damped least squares method, and the Levenberg–Marquardt method are compared. The results show that the standard LM method achieves the best overall performance in terms of accuracy and convergence speed, but still has deficiencies in joint limit constraint handling and redundancy utilization. To address these issues, an improved LM algorithm is proposed that integrates an interior-point penalty function, null-space redundancy optimization, and a weighted multi-prior warm-start strategy into a unified framework. A logarithmic barrier function embeds joint limits into the optimization objective, ensuring that the iteration remains within the feasible region at all times. By projecting auxiliary objectives onto the Jacobian null space, the redundant degree of freedom is actively utilized to improve motion smoothness while maintaining end-effector accuracy. Simulation results demonstrate that the proposed algorithm reduces the joint limit violation rate, improves trajectory tracking smoothness, and enhances the cold-start success rate while maintaining end-effector positioning accuracy. This study provides a feasible technical solution for inverse kinematics solving of non-Pieper redundant manipulators.
No takes yet. Share an insight, caveat, or question.
Zhangyong Du (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: