Answers are grounded in this paper and cite their sources.
The development of centimeter-scale metalenses is often constrained by the quadratic scaling of conventional finite-difference time-domain (FDTD) methods, where simulation time increases significantly with the aperture diameter. To address this computational challenge, we present an accelerated FDTD methodology that establishes a linear relationship between simulation time and aperture size for metalenses up to 1 cm in diameter. This approach reduces the simulation time for a 1 mm aperture to approximately 4 hours. The proposed method restricts full-wave simulations to a designated set of representative basis patches, subsequently leveraging the finite rotational symmetry of the remaining patches within identical annular zones through a fast Delaunay triangulation interpolation algorithm. The performance of this methodology is evaluated across various numerical apertures ( \(NA = 0.3, 0.6,\) and 0.9). For experimental validation, a millimeter-sized metalens with an \(NA\) of 0.3 was fabricated utilizing a hybrid holey-pillar silicon nitride ( \(Si_3N_4\) ) meta-atom structure. This hybrid design offers a practical advantage by reducing the height of the meta-atoms to 550 nm while maintaining full \(2π\) phase modulation, which is achieved through complementary phase retardations between the holey and pillar meta-atoms. The fabricated metalens exhibits reliable optical performance, demonstrating a Strehl ratio of 0.9, a veiling glare index (VGI) of \(3.8%\) , and an \(MTF50%\) cutoff frequency of \(478~cycles/mm\) .
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: