Answers are grounded in this paper and cite their sources.
Insufficient separation between adjacent buildings can produce repeated impact, large local contact forces and redistribution of seismic demand during strong ground motion. Conventional reduced-order pounding models usually assume linear structural response before contact and introduce nonlinearity only through the impact element. This study investigates a different mitigation mechanism in which the dominant lateral response of one building contains an effective cubic stiffness that can be tuned to modify the relative motion across the seismic joint. An exact pre-impact criterion is first established for arbitrary ground acceleration: the minimum separation required to prevent first contact is determined exclusively by the maximum oriented relative displacement of the uncoupled adjacent structures and is independent of the subsequent contact constitutive law. For harmonic excitation, the nonlinear structural response is reduced to a cubic amplitude equation whose discriminant identifies single- and multiple-response regimes and yields closed-form fold and cusp boundaries. These response branches are then mapped directly into branch-dependent seismic separation requirements through their relative amplitude and phase. For the representative building pair, at Ω/ω₂=1.20 and a₀=0.12g, one stable response state requires approximately 0.200 m of clearance, whereas a coexisting nonlinear state requires only about 0.034 m because the structures move nearly in phase. Treating the cubic stiffness as a design parameter produces a root-robust safe region and an optimum near 2.44×10⁹ N/m³, for which the predicted onset gap is reduced to approximately 26.7 mm. Nonlinear Hertz-type impact simulations confirm the transition between repeated pounding and impact-free response, while broadband excitation verifies the general first-impact criterion. The results demonstrate that appropriately tuned structural nonlinearity can act as a passive pounding-mitigation mechanism by simultaneously controlling response amplitude and phase. The proposed onset boundaries and separation-gap maps provide a computationally inexpensive screening framework for the preliminary design and assessment of adjacent structures before detailed nonlinear contact analysis.
No takes yet. Share an insight, caveat, or question.
Salas et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: