Answers are grounded in this paper and cite their sources.
Microgrid islanding detection is one of the important requirements in the use of solar microgrids to ensure personnel safety and prevent equipment damage. This paper presents a fast online islanding detection method using voltage positive feedback (VPF) measured at the PCC point. In the proposed method, the voltage amplitude value is monitored instantaneously at the PCC point, and if the voltage deviation, which ultimately causes frequency deviation, occurs and exceeds the specified allowable value, VPF is applied to accelerate the frequency change and reduce the detection time. The method has been evaluated using simulation in MATLAB/Simulink environment on a 10 kW photovoltaic microgrid under different load conditions. The results show that the proposed VPF method detects islanding in the worst case of power imbalance within 50 ms, which is much faster than conventional passive methods (500 ms or more) and has a performance comparable to active methods without power quality degradation. The non-detection zone is also reduced to less than 0.5% of active power imbalance. Meanwhile, while operating in islanded mode, the frequency and voltage remain within the permissible range of the IEEE 1547 standard. These findings confirm that the proposed approach provides a reliable, fast, and non-intrusive solution for islanding detection in solar microgrids.
No takes yet. Share an insight, caveat, or question.
Abdalkarim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: