Answers are grounded in this paper and cite their sources.
Timber-concrete composite systems present a solution for the construction of building floor slabs with enormous advantages over the predominant systems entirely resolved with reinforced concrete from the point of view of sustainability and the use of materials. A variety of shear connection solutions between the materials, which are essential to the system's operation, have been studied, along with the behaviour of full-scale slabs working as simply supported members. However, there are few studies that have examined the continuous behaviour of these slabs, in order to take advantage of the enormous benefits of continuity provided by in-situ concrete pouring to form semi-rigid joints. This paper presents the experimental results corresponding to a structural joint that represents the intersection of two floor slab sections on a beam. Both the beam and the floors are made with a solution of ribbed precast cross-laminated timber pieces, whose ribs incorporate perforations that allow the shear connection to be resolved without the need for additional metal fittings or adhesives. Concrete with recycled aggregates and home-grown wood are used to increase the sustainability of the proposal. The experimental results highlight the difference in section stiffness when working with hogging moments that generate tensile stresses in the concrete compared to the sagging moments usually analysed in simply supported pieces. It is found that the loss of stiffness of the cross-section generated by the cracking of the concrete is between 49-59%. Based on the experimentally measured deformations and rotations, a FEM model is validated that enables the analysis of floors working in continuity, considering the effects of concrete cracking. Based on these models, it is found that in continuous slabs with a span of 6 meters, the load can be increased by up to 74% in relation to simply supported slabs and the deformations can be reduced by up to 48% for the same load levels. This demonstrates the viability of the proposed solution, which incorporates beams, supports and slabs, and the importance of incorporating the analysis against hogging moments of TCC systems to obtain their maximum potential.
No takes yet. Share an insight, caveat, or question.
Otero-Chans et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: