Answers are grounded in this paper and cite their sources.
MXenes are promising cold cathode materials owing to their high electrical conductivity, solution processability, and tunable surface terminations; however, realizing high-current-density field emission from MXene film emitters remains challenging because their planar two-dimensional geometry generally provides limited field concentration and restricts the number of field-activated emission sites. Here, we demonstrate a geometry-driven strategy to achieve high-current-density field emission from vertically oriented MXene film edge emitters. By systematically controlling the film height and inter-electrode gap, the optimized emitter achieves a current density of 5020 mA cm-2 at 1520 V, which is more than an order of magnitude higher than the values reported for previous MXene field emitters. Enhanced performance is not governed by the field enhancement factor alone. Instead, it is enabled by the balance between sufficient local field enhancement and a large effective emission area. Experimental Fowler-Nordheim analysis, emission pattern imaging, and the screening-corrected field-enhancement model indicate that excessive field concentration can promote edge-localized emission and reduce the effective emission area, whereas the optimized geometry enables distributed edge emission with improved stability. These findings establish edge-geometry engineering as a design principle for transforming two-dimensional MXene films into high-current-density cold cathodes for vacuum nanoelectronics.
No takes yet. Share an insight, caveat, or question.
Han et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: