Answers are grounded in this paper and cite their sources.
The effect of reoriented hydrides in chromium coated Zircaloy-4 alloys using cold spray and physical vapor deposition methods was compared to uncoated Zircaloy-4, a reference light water reactor cladding material. The reorientation studies were carried out in an internal pressurization assembly inside of a furnace under conditions resembling pellet cladding mechanical interactions. The morphology of the reoriented hydrides of the bare coating was consistent with reorientation tests that can be found in literature. At elevated strains above 0.3% hoops strain, the chromium coated tubes formed small cracks in the hard chromium layer which led to localized stress concentrations that ultimately caused the precipitation of radially oriented hydrides at crack tips. Through high-resolution neutron radiography, spatially-resolved hydrogen concentration was characterized in the cladding. Large gradients the hydrogen concentration were observed in chromium coated cladding compared to the relatively homogenous distribution of the bare cladding. Furthermore, through ring compression testing, the resulting mechanical response to of bare versus chromium coated cladding with radial hydrides was demonstrated. Specifically, localized radial hydrides at coating cracks caused multiple shallow locations of cladding cracking where the bare material cracked more catastrophically due to the higher connectivity of radial and circumferential hydrides.
No takes yet. Share an insight, caveat, or question.
Colldeweih et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: