Answers are grounded in this paper and cite their sources.
作者:郭洋洋Author: Guo YangyangORCID:0009-0006-6669-1790Contact email:gyy-goes@foxmail.comPublication Type: PreprintSubmission Date: November 12, 2026Version: v1.0 Bilingual EditionPreprint DOI: 10.5281/zenodo.24152310Open Access License: CC BY 4.0 本规范是层级截面几何(LSG)第 2 个一阶基础负维度的标准化接入文档,编号 2。它承接主规范对空间单元与表观长度的定义,但不承接引力槽的任何动力学结论:两个槽位共用同一舞台,不共用同一组方程。 This specification is the standardised access document for the second first-order basal negative dimension of Layered Sectional Geometry (LSG), numbered 2. It inherits the main specification’s definitions of the space unit and the apparent length, but inherits none of the gravitational slot’s dynamical conclusions: the two slots share one stage, not one set of equations. 所属体系正式命名:跨领域本体统一与表征统合型万物理论(Ontologically Unified & Representationally Integrated Cross-domain Theory of Everything,简称 OUR-TOE)。本文件属 L3 槽位层(第 2 负维度·电力);命名与两层定位见《理论总序 v1.0》。 System designation: Ontologically Unified & Representationally Integrated Cross-domain Theory of Everything (OUR-TOE). This document sits at layer L3 (slot layer), the second negative dimension, electricity. For the designation and the two-layer positioning, see General Preface v1.0. 本阶段只做静电切片。为什么必须切片,见下一节的拆分合法性声明;切片之后能独立验收哪些项,见验收一节。 This stage covers the electrostatic slice only. Why a slice is unavoidable is argued in the next section on the legality of the split; which items can be accepted independently once the slice is taken is covered in the acceptance section. 前置文档:第1负维度主规范 v1.2 1-A 1-B 1-C Prerequisite documents: First negative dimension main specification v1.2 1-A 1-B1-C 拆分合法性的边界声明 · Boundary Statement on the Legality of the Split 动手之前必须先把一件事讲清,否则整份规范站不住:电场与磁场不是两个相互作用,它们是同一个 U(1) 规范场 的不同分量,在参考系变换下互相混合。把“电力”和“磁力”登记为两个负维度,是否违反物理事实? One point must be settled before anything else, or the whole specification collapses: the electric and magnetic fields are not two interactions; they are different components of one and the same U(1) gauge field , mixing into each other under a change of reference frame. Does registering “electricity” and “magnetism” as two negative dimensions violate the physics? 答案取决于拆的是哪一层。 The answer depends on which layer is being split. 层级 / Layer 拆分后是否成立 / Does the split hold 本体层 / Ontological layer 不成立。只有一个 U(1) 场、一个耦合常数 、一个规范群。任何声称存在两个独立本体场的说法都是错的。No. There is one U(1) field, one coupling constant , one gauge group. Any claim of two independent ontological fields is wrong. 表征层 / Representational layer 成立。固定叶面后,纵向分量与横向分量可分别定义、分别测量、分别验收,各自是完整的单属性对象。Yes. Once a foliation is fixed, the longitudinal and transverse components can be defined, measured and accepted separately, each a complete single-attribute object. 代价必须一并写明:一阶拆分丢掉洛伦兹协变性。换参考系时 与 互相转化,一阶槽内的读数随之改变。因此一阶电力槽的适用域是“固定叶面后的静态切片”,并明确标注为非协变登记。 The cost must be stated alongside: the first-order split gives up Lorentz covariance. Under a change of frame and convert into each other, and the readings inside the first-order slot change with them. The domain of the first-order electric slot is therefore “the static slice after the foliation is fixed”, explicitly flagged as a non-covariant registration. 二阶电磁耦合槽的职责,就是把这一个纵向扇区与磁力槽的横向扇区合回同一个 U(1),恢复协变。这不是打补丁,而是分阶设计的必然结果:一阶拆开做单属性,二阶合回做协变。这个顺序恰好符合“先确认基础槽位、再扩为家族、最后跨槽交互”的既定路线。 The job of the second-order electromagnetic coupling slot is precisely to merge this longitudinal sector with the magnetic slot’s transverse sector back into one U(1) and restore covariance. This is not a patch but the necessary consequence of the stage design: stage one splits to obtain single attributes, stage two merges to obtain covariance. That order matches the established route — confirm the basal slots first, expand into a family second, and interact across slots last. 槽位登记 · Slot Registration 项目 / Item 定义 / Definition 维度编号 / Dimension number 第2负维度(一阶基础负维度)Second negative dimension (first-order basal negative dimension) 槽位名称 / Slot name 电力槽(纵向单属性通道)Electric slot (longitudinal single-attribute channel) 规范群 / Gauge group U(1),一阶仅取纵向(静电)扇区U(1); at first order only the longitudinal (electrostatic) sector 载体 / Carrier 每个空间单元内部的一个 U(1) 相位,模 One U(1) phase inside each space unit, modulo 槽内荷 / In-slot charge 电量 (U(1) 荷),取离散谱(量子化)Electric charge (U(1) charge), discrete spectrum (quantised) 耦合强度 / Coupling strength ,为内容层输入参数,框架不推导A content-layer input parameter; the framework does not derive it. 自由度 / Degrees of freedom 1 个标量势(静态),受高斯约束;不含横向自由度One scalar potential (static) subject to the Gauss constraint; no transverse degrees of freedom. 本阶段范围 / Scope of this stage 静电、静场、导体与介质中的静电场Electrostatics and static fields, including static fields in conductors and media. 明确排除 / Explicitly excluded 磁场、辐射、推迟效应、真空极化修正,全部留二阶Magnetic fields, radiation, retardation effects and vacuum-polarisation corrections are all left to stage two. 与引力槽接口 / Interface with the gravity slot 空间单元与表观长度按 标定;一阶不引入刻度与电场的动力学耦合Space units and apparent lengths are calibrated by ; at first order no dynamical coupling between the scale and the electric field is introduced.
No takes yet. Share an insight, caveat, or question.
洋洋 郭 (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: