Answers are grounded in this paper and cite their sources.
Diamond-like carbon (DLC) coatings were deposited on hardened SUJ2 steel subjected to two different quenching process atmospheres: gas-controlled and low-pressure conditions. In this study, a hybrid PVD/PE-CVD technique was employed to fabricate the DLC coating films, aiming to enhance surface hardness and improve tribological performance. The effects of quenching atmosphere on surface integrity and coating performance were evaluated using SEM, Raman spectroscopy, surface profilometry, Vickers hardness and dynamic ultra-micro hardness tests, coating thickness measurement, and scratch testing. SEM observation revealed microcracks on gas-quenched surfaces, while low-pressure quenched specimens werecrack-free. Raman spectra confirmed successful DLC deposition on all samples through the presence of characteristic D and G bands. Although substrate hardness was similar, the presence of microcracks led to non-uniform coatings, reduced hardness by approximately 400 Hv, increased thickness, and affected adhesion behaviour (higher Lc1 but lower Lc2). In contrast, low-pressure quenching resulted in uniform coatings with higher Lc2 values, indicating improved adhesion. These findings indicate that low-pressure quenching enhances surface integrity and optimizes DLC coating performance. Additionally, it offers industrial advantages, including reduced polishing requirements, shorter processing time, and lower production costs.
No takes yet. Share an insight, caveat, or question.
TAKSADEJ et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: