Answers are grounded in this paper and cite their sources.
作者:郭洋洋Author: Guo YangyangORCID:0009-0006-6669-1790Contact email:gyy-goes@foxmail.comPublication Type: PreprintSubmission Date: November 12, 2026Version: v1.1 Bilingual EditionPreprint DOI: 10.5281/zenodo.24162830Open Access License: CC BY 4.0 这是协议层的第二份文档。它与 P-1 在结构上有本质差别:P-1 是把一个场切开的两半对齐,几乎不需要新参数;P-2 是让两个场经一个角耦合,因此必然引入一个协议级参数——混合角。这个参数不属于任何一个槽位,只能登记在文档里。 This is the second document of the protocol layer. It differs from P-1 in structure fundamentally: P-1 aligns the two halves of one field that had been cut apart and needs almost no new parameter, whereas P-2 couples two fields through an angle and therefore must introduce a protocol-level parameter, the mixing angle. That parameter belongs to no slot and can only be registered in the document. 所属体系正式命名:跨领域本体统一与表征统合型万物理论(Ontologically Unified & Representationally Integrated Cross-domain Theory of Everything,简称 OUR-TOE)。本文件属 L4 协议层(P-2 v1.1 现行);命名与两层定位见《理论总序 v1.0》。 System designation: Ontologically Unified & Representationally Integrated Cross-domain Theory of Everything (OUR-TOE). This document sits at layer L4, the protocol layer (P-2 v1.1, current). For the designation and the two-layer positioning, see General Preface v1.0. v1.1 修订只做一件事:把二阶层按「结构必然性/参数偶然性」拆开,逐条给条文定性并打标签,补「性质标定」一节。不改动 v1.0 的任何物理内容与数值。 The v1.1 revision does one thing only: it separates the second-order layer along the divide of “structural necessity / parametric contingency”, determines and labels the nature of each provision, and adds a “Nature Calibration” section. No physical content and no numerical value of v1.0 is changed. 前置文档:电力槽 弱力槽 P-1 Prerequisite documents: the electric slot the weak-force slot P-1 文档编号与双方 · Document Number and the Two Parties 项目 / Item 内容 / Content 文档编号 / Document number P-2 类型 / Type 二阶耦合文档,且为统一型:不仅同台,还给出荷的分解关系;本篇法则与协议并重A second-order coupling document of the unification type: not merely co-presence but a decomposition relation between the charges. Here law and protocol carry equal weight 体裁名说明 / Note on the genre name P 系列此前统称“协议”,现拆为法则与协议两类;P-n 仅为编号,不代表整篇性质The P series was formerly called “protocols” as a whole and is now split into laws and protocols. P-n is a mere index and does not designate the nature of the whole document 甲方 / Party A 第2负维度 电力槽(U(1),经 P-1 已协变化)Second negative dimension, the electric slot (U(1), already made covariant by P-1) 乙方 / Party B 第4负维度 弱力槽(SU(2),破缺相)Fourth negative dimension, the weak-force slot (SU(2), broken phase) 新增参数 / New parameter 一个协议级参数:混合角。两槽都不登记它One protocol-level parameter: the mixing angle. Neither slot registers it 合并目标 / Aim of the merge 把弱同位旋与超荷合成为电荷,并给出质量生成规则Compose weak isospin and hypercharge into electric charge, and give the mass-generation rule 生效条件 / Conditions of validity 见「生效条件与退化检验」一节See the section “Conditions of Validity and Degeneration Tests” 本版修订说明(v1.0 至 v1.1)· What Changed in This Version (v1.0 to v1.1) • 新增「性质标定」一节:给出法则与协议的判定标准,以及本篇的组成比例。A new section, “Nature Calibration”, gives the criteria separating laws from protocols and states the composition of this document. • 新增「条文性质总表」:四条条文按其内部构成拆分定性,一条可同时含法则与协议。A new “Summary Table of Provision Natures” classifies the four provisions by their internal composition; a single provision may contain law and protocol at once. • 条文标题加性质标签,正文首句写明定性及其理由。Provision headings now carry nature labels, and the opening sentence of each states the determination and its rationale. • 「三个输入参数」补一句定性:参数的计数是法则,参数的取值是协议。“Three Input Parameters” gains a clarifying sentence: the count of parameters is law, the values of the parameters are protocol. • v1.0 的物理内容、数值、验收表、边界声明全部保留,未作改动。All physical content, numerical values, acceptance table and boundary statements of v1.0 are retained unchanged. 性质标定 · Nature Calibration 二阶层的条文分两类。判定标准不是“重不重要”,只有一个:有没有第二种自洽可能。没有第二种可能的,是法则;有多种自洽取值、本宇宙只选了其中一组的,是协议。 Second-order provisions fall into two classes. The criterion is not “whether it matters”; there is only one test: is there a second self-consistent possibility? Where there is none, it is a law; where several self-consistent values exist and this universe picked only one set, it is a protocol. 判定维度 / Criterion 法则(结构必然)Law (structural necessity) 协议(参数偶然)Protocol (parametric contingency) 唯一性 / Uniqueness 合法结构唯一,无第二种自洽方案The legitimate structure is unique; there is no second self-consistent scheme 存在多组自洽取值,本宇宙只取一组Several self-consistent value sets exist; this universe takes one 来源 / Origin 槽位的规范群结构、数学属性、本体论约束The slot’s gauge-group structure, mathematical properties, ontological constraints 本宇宙的观测标定Observational calibration of this universe 可推导性 / Derivability 可从一阶槽定义纯逻辑推出Derivable by pure logic from the first-order slot definitions 只能测出来,推不出来Can only be measured, not derived 可修改性 / Modifiability 改了立刻破自洽Changing it breaks self-consistency at once 改数值不破坏结构,只换一套参数Changing the value breaks no structure, it only swaps one parameter set for another 退化性 / Degeneration 关掉耦合,严格退回一阶条文Switching the coupling off returns strictly to the first-order provisions 参数归零等价于关掉耦合Setting the parameter to zero is equivalent to switching the coupling off GDE 权限 / GDE competence 可判对错,不通过即架构非法It may judge right or wrong; failing it makes the architecture illegitimate 只判是否越界,不裁定数值It only judges whether a boundary is overstepped, never the value itself 一句话概括:法则由槽位属性唯一决定,可以从一阶定义推出来;协议是本宇宙的选型,只能测出来。 In one sentence: a law is uniquely fixed by the slot’s properties and can be derived from the first-order definitions; a protocol is this universe’s choice and can only be measured. 本篇的比例:四条条文全部属法则,另有三个协议参数项——混合角取值、两个耦合的强度取值、破缺能标与质量谱。所以本篇不像 P-1 那样“几乎全是必然”:法则决定框架长什么样,协议决定它有多强。缺任一方,这份文档都不完整。 The proportions in this document: all four provisions are laws, alongside three protocol-parameter items — the value of the mixing angle, the values of the two coupling strengths, and the symmetry-breaking energy scale together with the mass spectrum. So this document is not “almost entirely necessity” as P-1 is: law decides what the frame looks like, protocol decides how strong it is. Either one missing and the document is incomplete. 这正是它比 P-1 难一档的真实原因:P-1 只需要对齐,P-2 需要同时交出结构与数值,而后者只能测。 This is the real reason it is a grade harder than P-1: P-1 only has to align, whereas P-2 must deliver structure and numbers together — and the latter can only be measured.
No takes yet. Share an insight, caveat, or question.
洋洋 郭 (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: