Answers are grounded in this paper and cite their sources.
The unreliable electrical supply and costs of running independent pumps and power generation systems may limit their use for water pumping in rural areas. This paper outlines the development of a multi-functional system involving the reuse of a 97.2 cc motorcycle engine for both water pumping and electricity generation. Both a self-priming centrifugal pump and a 24V 40A DC generator were attached to the reused engine using a chain-sprocket drive. The design of the multi-functional system was based on calculations of engine power and generator output, as well as testing of water delivery rate and electric power. The experiment was conducted at an engine speed of 3000 rpm, with a calculated engine power of about 2.5 kW. With these test parameters, the pump was able to deliver up to 70 L/min, while the generator could produce 22-24V with a current of 40A, corresponding to a maximum calculated electrical output of 960 W. The results indicate that the used motorcycle engine is capable of offering both hydraulic and electric services through a combined system. This configuration has been proposed as an approach for use in rural areas where an efficient and reliable energy conversion system is required. Further investigation would include the quantification of fuel use, hydraulic efficiency, transmission efficiency, electrical efficiency, and emissions under varying operating conditions.
No takes yet. Share an insight, caveat, or question.
H. et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: