Answers are grounded in this paper and cite their sources.
The share of feed in the cost of livestock and poultry production amounts to up to 60% of total costs. The feeding ration of animals and poultry changes throughout the year. To maintain product output at approximately the same level, it is necessary to provide feed that contains natural vitamins. A technology for preparing a vitamin feed supplement based on sprouted grain is proposed. Attention is paid to the technological operation - chopping the sprouts to the size of compound feed particles of 1.1-1.6 mm. This operation is carried out using knives. Sprouted grain consists of a weakly bonded sprout and a grain kernel. To chop them, it is necessary to use two methods - crushing for the grain kernels and cutting for the sprouts. A classification of methods for preparing feed for feeding is presented, and the direction of the research is indicated. A methodology for selecting the design parameters of knives for chopping sprouted grain is proposed. A classification of chopping units is provided, and the direction of development is indicated. The calculation ratios are based on V.P. Goryachkin's theory of energy consumption for cutting. Ratios are obtained that relate the knife sharpening angle to the knife blade thickness and the initial layer height. The knife blade thickness and the compression layer thickness are linked to the strength properties of the material, which allows optimizing the parameters and dimensions of the working parts of the chopper's cutting apparatus. It was determined by calculation that with a knife thickness b=0.002 m, a cutting edge thickness a=20·10⁻⁶ m, and a blade sharpening length l=0.004 m, the knife sharpening angle α will be 14-17°. For a linear knife speed of 12 m/s, an angular knife speed of 272.3 rad/s, and a cutting edge length of 0.05 m, the number of knives moving in the same plane is 6 units. An experimental setup for chopping sprouted grain and its technical characteristics are presented.
No takes yet. Share an insight, caveat, or question.
SAENKO et al. (2026) studied this question.
Synapse has enriched 3 related papers. Consider them for comparative context: