Answers are grounded in this paper and cite their sources.
In this paper, a separate absorption, charge, and multiplication avalanche photodiode (SACM-APD) based on a GaN/Ga₂O₃ heterostructure is designed and optimized for high-performance ultraviolet single-photon detection. First, we evaluate a conventional SACM architecture using an n − -type Gallium nitride (GaN) multiplication layer and a n + -type gallium oxide (Ga₂O₃) charge layer and an n − -type Ga₂O₃ absorption layer as a baseline. To improve carrier-multiplication dynamics and mitigate high-field heterojunction interface issues, we propose a novel structurally modified APD that integrates a p − -type GaN multiplication layer, an n + -type GaN charge layer, and an n − -type Ga₂O₃ absorption layer. In photodetectors exhibiting low quantum efficiency at zero bias, calculating the gain based on the zero-bias photocurrent often leads to overestimation artifacts. To prevent this error and provide a rigorous physical assessment, the avalanche gain in this study is calculated relative to the average unmultiplied photocurrent in the pre-avalanche region. Simulation results demonstrate that the proposed structural modifications significantly enhance device performance. Compared to the conventional baseline, the proposed SACM-APD achieves a 93.7% enhancement in avalanche gain, increasing from 1.6 × 10 6 to 3.1 × 10 6 approximately, which corresponds to a multiplied responsivity of 1.603 × 10 6 A/W under 254 nm back-illumination. Furthermore, the operating breakdown voltage is favorably reduced from 55.55 V in the baseline to 52.77 V in the proposed structure. These findings highlight the robust potential of the proposed architecture for next-generation, high-gain single-photon avalanche detectors (SPADs).
No takes yet. Share an insight, caveat, or question.
Khoddami et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: