Design Blueprint: A Solar Array Derated for Venus Surface Light Levels with Acid Protection: Area and Output Sizing

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24199834): This study sizes a Solar Array Derated for Venus Surface Light Levels with Acid Protection for operation in the Venus surface environment and reports the result as SIMULATED, NOT MEASURED. The design is developed from stated physical relations and a shared environmental basis, and every performance figure is computed by the deposited script rather than asserted. Among the computed results are solar flux at the surface of 105.0 watts per square metre, cell efficiency at operating temperature of -0.0797 as a fraction, effective efficiency after cover and soiling of -0.0652 as a fraction, power per square metre of -6.85 watts. Mass and power budgets are assembled from components so that they can be audited, off-design behaviour and materials uncertainty are discussed openly, and the limits of the sizing are stated in full. The system is a civilian science and construction design intended for a robotically serviced surface station. The principal computed results are venus pressure bar of 92.0; venus temperature k of 735.0; venus density kg m3 of 65.0; venus gravity m s2 of 8.87. Further results include venus solar day h of 2808.0; venus night h of 1404.0; surface flux w m2 of 105.0; efficiency at temp of -0.0797. The design is a computed study for peaceful surface operations on Venus — power supply, thermal control, construction and resource handling for a surface station — and it has no targeting or weapon application. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.