Answers are grounded in this paper and cite their sources.
Vertically aligned ZnO nanorod arrays are used as antireflection and light-extraction layers on optoelectronic devices, but their alignment in hydrothermal synthesis is usually controlled through strongly coupled chemical parameters. In this study, the effect of the loading direction of the seeded substrate in the autoclave was isolated by growing upward- and downward-facing substrates side by side in a single run, so that all chemical parameters were identical. On both SiO₂/Si and GaN-based light-emitting diode (LED) substrates, the downward-facing configuration produced dense arrays of c-axis-aligned rods, 100–200 nm wide and terminated by hexagonal (0001) facets, whereas the upward-facing configuration produced randomly inclined needles a few tens of nanometers wide, accompanied by sedimented ZnO agglomerates. A Stokes-law estimate showed that particulates formed in solution settle over centimeter distances within the growth time, supporting gravitational sedimentation as the origin of this difference. On the LED substrate, the aligned array showed a resolved near-band-edge emission at 380 nm, a weaker deep-level emission, and a clearly transmitted 450 nm LED emission, which was not detected through the randomly oriented array. Its transmittance at 450 nm was 1.95 times higher, and the nearly wavelength-independent difference in extinction indicated that the gain originated mainly from reduced Mie scattering rather than from index matching. These results show that the substrate loading direction is a significant growth parameter that should be controlled and reported in the hydrothermal synthesis of ZnO nanorod arrays.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: