Answers are grounded in this paper and cite their sources.
A low-cost wireless embedded system was developed and evaluated for the local and real-time detection of non-technical losses caused by electrical bypasses in low-voltage service drops. The architecture consists of two ESP32-based measurement nodes equipped with PZEM-004T V3 modules and interconnected through ESP-NOW. Node A measures the electrical variables at the service connection point, whereas Node B acquires the billing-point variables, processes the received telemetry, and displays the operating status through a local web dashboard. The detection model incorporates the estimated resistive loss of the service drop and applies a current-dependent dynamic threshold to distinguish technical losses from unexplained power discrepancies. Measurement pairs are validated through sequence identification, timestamp-based synchronization, and wireless-link quality criteria before classification. The experimental campaign comprised 40 scenarios, including 20 controlled tests and 20 different residential service drops with conductor cross-sectional areas of 6 and 10 mm², lengths from 4 to 25 m, and different load profiles. Thirty-eight acquisitions satisfied the established quality criteria. The system obtained 9 true positives, 28 true negatives, 0 false positives, and 1 false negative, corresponding to an accuracy of 97.37%, sensitivity of 90.00%, specificity of 100.00%, and precision of 100.00%. The ESP-NOW link achieved an overall packet error rate of 0.79% and a mean transmission latency of 4.36 ms. The results show that technical-loss compensation and acquisition-quality control reduce false alerts under the evaluated high-load, transient, and nonlinear operating conditions.
No takes yet. Share an insight, caveat, or question.
Armas et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: