Answers are grounded in this paper and cite their sources.
Porous filler incorporation in polymer matrix is one of the most effective ways to enhance permeability, separation efficiency, thermal-mechanical stability and fouling resistance of a membrane. Zeolitic imidazolate framework (ZIF) is a potential class of porous material which can be used in gas separation membranes due to the advantages of small pore aperture and excellent thermal and chemical stability. Herein, we report a Mixed Matrix Membrane developed by incorporating Ag-doped bimetallic ZIF-8 nanoparticles into a polyvinyl chloride/polyethylene glycol diamine (PVC/PEGdiamine) matrix via simple blending method. To boost the selectivity, a thin layer of chitosan crosslinked with silver was laminated on the blend membrane. The structural and chemical properties of the materials and membranes were well characterized via sophisticated analytical tools. In addition to the tunable porous architecture of the modified ZIF-8, this synergistic design provides enhanced interfacial compatibility and defect suppression. The gas permeance measurements of the constructed membranes for a wide range of gases viz., H 2 , N 2 , O 2 , C 2 H 4 and C 2 H 6 revealed a maximum H 2 /N 2 selectivity of 3.2 while selectivities obtained for other gas pairs O 2 /N 2 and C 2 H 4 /C 2 H 6 remained comparatively very low, indicating the transport was predominantly governed by Knudsen diffusion. The highest H 2 permeance exhibited by the fabricated MMM is 6258 GPU. The MMM showed a water flux of 58.2 L.m − 2 .h − 1 with a 69.7% rejection of MB dye aqueous media. The adsorptive behaviour of ZIF-8@Ag and size sieving property of the membrane participate simultaneously in effective removal of the MB dye from aqueous solution.
No takes yet. Share an insight, caveat, or question.
Bora et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: