Answers are grounded in this paper and cite their sources.
Closed pores are critical structural motifs that enable low‐voltage plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries, yet their controllable construction through precursor molecular design remains challenging. Herein, we demonstrate molecular bridging flexibility as an effective design principle for regulating closed‐pore formation in HCs. The flexibility/rigidity of polymer precursors is tailored by distinct bridging configurations, namely Ar─CH 2 ─Ar and Ar─O─C bridges, where oxygen‐containing bridges enhance segmental flexibility. During early‐stage pyrolysis, flexible precursor segments provide higher conformational freedom, inducing curved carbon skeletons and promoting the formation of semi‐open sub‐1 nm pores. Driven by high surface energy, these semi‐open pores undergo pore‐mouth closure during high‐temperature pyrolysis, generating abundant closed pores. The resulting HC exhibits a closed porosity of 0.12 cm 3 g −1 and a pore size 1.13 nm, which enhances plateau capacity and sodium‐ion diffusion kinetics. Consequently, the flexible‐precursor‐derived HC delivers a high reversible capacity of 356.1 mAh g −1 and a plateau capacity of 242.7 mAh g −1 . Moreover, a practical 1.2 Ah pouch cell achieves 217.2 Wh kg −1 and retains 81.2% of its initial capacity after 100 cycles at 0.5 C. This work establishes a molecular‐level strategy for closed‐pore engineering in HC anodes for high‐performance sodium‐ion batteries.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: