Answers are grounded in this paper and cite their sources.
Ice accretion poses a significant threat to the aerodynamic performance and operational safety of unmanned aerial vehicles, particularly under low Reynolds-number where boundary-layer behaviour is highly sensitive to surface disturbances. This study investigates the effects of realistic glaze and rime ice accretion on the aerodynamic characteristics and flow physics of a high-camber S1223 airfoil. Icing experiments were conducted in a controlled icing wind tunnel under two distinct atmospheric regimes: glaze ice formation at −5 °C with high liquid water content, and rime ice formation at −20 °C with low liquid water content. The resulting ice geometries were three-dimensionally scanned, digitally reconstructed, and reproduced using rapid prototyping to enable repeatable aerodynamic testing. Lift and drag measurements were performed in a low-speed wind tunnel over angles of attack from 0° to 24°, covering pre-stall and post-stall conditions. Time-averaged two-dimensional Particle Image Velocimetry (PIV) was employed to quantify ice-induced modifications to the flow field. The results reveal fundamentally different aerodynamic penalty mechanisms for glaze and rime ice. Glaze ice causes substantial geometric distortion, leading to premature flow separation, drag penalties exceeding 100% at high angles of attack, and marked alteration of stall behavior. In contrast, rime ice primarily introduces roughness-induced effects, increasing drag by up to approximately 89% at α = 24° while sustaining or enhancing lift at elevated angles and delaying distinct stall onset. These findings highlight the critical importance of accounting for realistic ice shapes and flow-field effects when assessing UAV aerodynamic performance and developing effective ice protection and mitigation strategies.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: