Answers are grounded in this paper and cite their sources.
Power tool holders (PTHs) play a crucial role in turn-milling machining (TMM); however, the cantilever effect reduces the selection of process parameters for workpiece milling. AISI 52100 is a high-carbon chromium bearing steel with a surface hardness of HRC 63 after heat treatment, exhibiting excellent wear resistance and strength. Nevertheless, it also presents challenges such as high cutting load, rapid tool wear, and difficulty in controlling surface quality. Multi-quality optimization technologies (MQOTs) have been successfully applied to many advanced industrial machining processes. Therefore, this study investigates the MQOTs of AISI 52100 hollow cylindrical rods (HCRs) in TMM. A 6 mm tungsten carbide end mill was used to mill a groove with a depth of 1.5 mm and a width of 10 mm, and four TMM parameters were systematically modified: cutting speed (A), feed rate (B), depth of cut (C), and cooling method (D). By combining MQOTs (DFA and GRA) with entropy weight method (EWM), multiple quality characteristics can be transformed into a single quality characteristic, while minimizing roundness error (RE) and surface roughness (SR), and maximizing tool life (TL) and material removal rate (MRR). The optimal TMM parameters were determined through analysis of variation (ANOVA) to be A3B2C1D2 (cutting speed 100 m/min, feed rate 0.06 mm/rev, depth of cut 0.10 mm, emulsified oil cooling). These parameters were validated experimentally, resulting in an increase in TL from 27 pieces to 33 pieces, an increase in MRR from 26.14 mm³/s to 30.40 mm³/s, a decrease in RE from 0.010 mm to 0.009 mm, and a decrease in SR from 0.238 μm to 0.218 μm. This study demonstrates that combining multiple quality optimization strategies (DFA and GRA) with EWM effectively overcomes the difficult-to-machine characteristics of AISI 52100 and addresses the machining efficiency and quality of PTHs in TMM.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: