Answers are grounded in this paper and cite their sources.
Microwave-induced fracturing has potential for mitigating dynamic hazards in coal mines. In this study, initially water-saturated bituminous coal specimens were subjected to microwave irradiation for 0, 40, 80, 120, and 160 s, followed by uniaxial compression tests using an MTS 322 electro-hydraulic servo testing machine coupled with a PCI-2 acoustic emission system. Infrared thermography, stress–strain behavior, fracture morphology, failure mode, and energy evolution were analyzed to evaluate the effects of microwave heating duration on the subsequent mechanical failure of the coal specimens. The untreated specimens exhibited pronounced strong dynamic failure. With increasing microwave heating duration, progressive postpeak failure became evident at 80 s, while obvious strain-softening behavior occurred at 120 s. Meanwhile, the dominant failure mode gradually changed from mixed tensile–shear failure to predominantly tensile failure. The elastic energy-storage capacity decreased with increasing heating duration, whereas the proportion of dissipated energy increased. With increasing microwave treatment duration, the failure intensity of the specimens decreased and the failure process became progressively milder and more controllable. The experimental observations indicate that vapor-pressure buildup within the pore–fracture network during microwave heating is an important mechanism responsible for microwave-induced damage in initially water-saturated coal. The microwave penetration depth into the coal seam increases as water is removed. During the application of microwave-induced fracturing technology, attention should be paid to controlling the effective range of microwave energy to avoid additional damage.
No takes yet. Share an insight, caveat, or question.
Yao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: