Answers are grounded in this paper and cite their sources.
Herein, we investigate selectivity of submicron-crystalline boron-doped diamond (SC BDD, ca 150 nm grain size) toward synthetic seawater oxidation. In seawater, Cl- oxidation reaction (ClOR) competes with water oxidation. We demonstrate that ClOR dominates at current densities of 20-100 mA/cm2, producing ClO- and HClO (ClO-/HClO) species with ca 60% faradaic efficiency (FE). Concentrations of toxic byproducts ClO3- and ClO4- were found to be lower than that of ClO-/HClO by factors of 20 and 105, respectively. Comparison of ClO-/HClO FEs to that of MC BDD (ca 20 µm grain size) [O.A. Baturina et al., J. Electrochem. Soc., 173, 146501 (2026)] shows 25% decrease in the FE for the former material. We hypothesize that sp2 carbon played a major role in suppressing the ClO-/HClO generation on SC BDD vs MC BDD. Comparison of polarization curves measured on SC BDD electrodes in seawater and 0.5M NaCl shows a positive shift in the onset potential of Cl- oxidation accompanied by lower currents in the entire potential region for a former solution. This was attributed to competition of seawater constituents such as SO42- for the sp2 carbon active sites. XPS characterization shows surface oxidation to ether/hydroxyl, carbonyl and carboxyl groups after anodic oxidation.
No takes yet. Share an insight, caveat, or question.
Baturina et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: