Answers are grounded in this paper and cite their sources.
Industrial laser scans are frequently reduced before geometric inspection, registration, and pose estimation. Such reduction can preserve broad surface coverage while interrupting the source-point sequences that support the estimation of hole rims, slots, interface edges, and related functional features. This paper presents a metrology-oriented source-point sampling method for industrial laser-scanned point clouds. The method assigns retention priorities to acquired points through a topology-guided protection field that combines local feature evidence, propagation along connected boundary segments, association across separated fragments, and attenuation outside feature regions. The selected cloud therefore remains a subset of the measured coordinates, rather than a set of generated replacements. The method was evaluated on ABC-derived workpieces, a controlled standard gauge, and high-voltage battery connector scans using reconstruction-oriented error, feature retention, edge-continuity dispersion, ablation tests, transfer without target fine-tuning, and a pose-oriented connector case study. At a 25% sampling rate, connector scans achieved 99.6% normalized feature recall and an edge-continuity dispersion of 0.0008. The pose case study reported a mean angular error of 3.77 degrees for three evaluated connector features. The results show that continuity-aware source-point selection can retain measurement-relevant boundary evidence under data reduction for the evaluated industrial scans.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: