Answers are grounded in this paper and cite their sources.
Excessive drill-string torque and stick-slip vibration severely restrict the safety and efficiency of deep and directional drilling. This paper proposes a torque-balanced drilling tool driven by positive- and reverse-hand screw motors in series, with a buffer airbag innovatively integrated in the middle of the series flow path. A torsional-hydraulic coupled dynamic model containing three rotating subsystems is established by the lumped-parameter method, and a nonlinear rate-weakening bit-rock interaction model is introduced. Modal analysis, frequency-domain analysis and time-domain simulations under step and impulse disturbances are carried out. The results show that the residual drill-string torque is reduced by 66.7% in steady state; the system without airbag has three dominant oscillation modes (1.76, 3.02 and 20.50 Hz); the inner bit is the most disturbance-sensitive component, with a step overshoot of 8.62% and a stick-slip limit cycle under low-speed conditions, while the outer bit remains stable. After introducing the airbag (compliance 5 × 10 −8 m³/Pa), the impulse pressure-drop spike is attenuated by 51%, the residual speed oscillation by about 82%, and the stick-slip limit-cycle amplitude by more than 96%. The proposed tool provides a new technical approach for downhole torque balancing and vibration suppression in deep wells.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: