Answers are grounded in this paper and cite their sources.
Commercial zeolite 13× is a benchmark hydrophilic FAU adsorbent with high dry-CO 2 capacity, but its application in humid direct air capture (DAC) is strongly limited by water competition. Here, 13× is used not as a new sorbent candidate, but as a model material to link bed-scale breakthrough, ex situ FTIR signatures, regeneration behavior, and reduced-order modeling during humid-air exposure. N 2 physisorption, mercury porosimetry, XRD, and FTIR confirmed a predominantly microporous FAU-type zeolite with a BET surface area of 710.1 m 2 ·g −1 and a micropore volume of 0.253 cm 3 ·g −1 . Under humid DAC conditions, the bed initially retained CO 2 , but the CO 2 breakthrough curve subsequently exhibited roll-up above unity, evidencing displacement of previously adsorbed CO₂ by the advancing water front. The maximum transient CO 2 uptake was only 0.0909 mmol·g −1 , whereas the final H₂O loading reached 13.38 mmol·g −1 and accounted for 96.4% of the measured bed mass increase. Staged ex situ FTIR supported this interpretation by showing early growth and later collapse of the molecular CO 2 band, together with progressive strengthening of H 2 O and carbonate−/bicarbonate-like regions. Dry pure- CO 2 adsorption was used as an upper-bound reference for intrinsic CO 2 affinity. Under this dry condition, the retained CO 2 loading reached 3.19 mmol·g −1 and breakthrough was monotonic, confirming that poor humid-DAC performance arises from competitive water adsorption. Thermal regeneration and reduced-order modeling further supported a water-driven CO 2 displacement mechanism, highlighting the need for humidity management, regeneration control, or sorbent modification in practical DAC processes.
No takes yet. Share an insight, caveat, or question.
Signorelli et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: