Answers are grounded in this paper and cite their sources.
The environmental impact of CNC milling was assessed by an energy footprint model based on ISO 14955, which accounts for the electricity consumption, use of lubricant, generation of waste, tool wear, and energy loss in CO2-equivalent emission. Validation was conducted by slot milling of the aluminium alloy A2017 in dry, MQL and conventional flood lubrication. Predicted electrical energy consumption showed good agreement with measured data, with a maximum error of 3.88 %, demonstrating the accuracy of the prediction model. The results demonstrated that the environmental impact was significantly influenced by the lubrication strategy. The use of flood has the most environmental impact as a consequence of much larger lubricant consumption and pumping energy. Dry machining eliminated the lubricant emissions but resulted in faster tool wear and poor surface finish. MQL was considered the best trade-off between machining quality justification and sustainability, given insufficient use of lubricant to lock the boundary layer better than in dry cutting. When considering tool wear and lubricant losses, life cycle assessment demonstrated that MQL has the potential to reduce total CO2-equivalent emissions by 45% over conventional flood lubrication. Therefore, MQL represented the best compromise between machining performance and sustainability in aluminium milling at the considered conditions.
No takes yet. Share an insight, caveat, or question.
Kannan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: