Answers are grounded in this paper and cite their sources.
Introduction. Quantum well infrared photodetectors (QWIPs) are among the key components of modern infrared imaging systems and are widely used for various applications, including space research, medical diagnostics, etc. One of the most important characteristics of a QWIP is the background-limited performance (BLIP) temperature, which is determined based on the equality condition between the background current and the dark current flowing through the photodetector. This parameter represents the operating temperature of the photodetector. Increasing the operating temperature can significantly reduce the requirements imposed on the cooling system. Since the background current depends on environmental conditions and the cryostat aperture, it is primarily requir ed to reduce the dark current values. The dark current is strongly dependent on the doping level of the quantum wells. However, the doping concentration also affects the photodetector sensitivity, creating a trade-off between sensitivity and dark current level. Aim. To investigate the effect of the doping level of quantum wells based on the GaAs/AlGaAs material system on the BLIP temperature. Materials and methods . Experimental photodetectors were fabricated by molecular beam epitaxy. The parameters of the samples were selected to ensure a peak spectral response wavelength in the range of 8…9 μm. The variable parameter was the doping level of the quantum wells with silicon. After completing the planar processing technological route, the current–voltage characteristics of all test photodetectors were measured in the temperature range of 65…77 K, and the corresponding curves of static current sensitivity were plotted. Results. A reduction in the doping level from 9.0·1017 to 4.5·1017 cm–3 was found to lead to a significant decrease in the dark current within the operating voltage range. This made it possible to increase the BLIP temperature from 69 to 71 K. This was associated with the expected decrease in photosensitivity; however, its value remained above the threshold level of 0.15 A/W. Conclusion. The obtained data demonstrate that optimization of the quantum well doping level in QWIPs provides for a reduction in the photodetector dark current. As a result, the device can be operated at higher temperatures.
No takes yet. Share an insight, caveat, or question.
Dudin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: