Answers are grounded in this paper and cite their sources.
The fatigue design of heavily loaded crane runway girders is significantly influenced by the fatigue classification of welded top flange-to-web junctions subjected to concentrated wheel loads. The current classification according to EN 1993‐1-9 is considerably more conservative than previous German design provisions and other international standards. To investigate the fatigue resistance of these details, 66 crane runway girders subjected to several decades of heavy service loading were examined in the field. Only three girders showed fatigue damage at the investigated welded connections, while the remaining girders exhibited no identified fatigue damage despite their extensive loading histories. The field data were evaluated using a maximum likelihood approach accounting for both damaged girders and runouts. Additional numerical investigations based on effective notch stresses and multiaxial fatigue assessment were conducted to evaluate the influence of weld geometry and plate thickness. Based on the combined investigations, supplementary fatigue classes ranging from FAT 71 to FAT 140 are proposed for different weld configurations and execution requirements. The results provide a basis for a more differentiated and economical fatigue assessment of welded top flange-to-web junctions in heavy-duty crane runway girders.
No takes yet. Share an insight, caveat, or question.
Feldmann et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: