Answers are grounded in this paper and cite their sources.
In this study, ammonium phosphomolybdate (AMP) and natural zeolite were separately immobilized in an alginate matrix to prepare two inorganic–alginate composite adsorbents for cesium (Cs) removal from simulated seawater. The study aimed to compare the adsorption performance of the two composites under saline conditions and evaluate their potential for Cs removal through batch and preliminary flow-through experiments. The distribution coefficients ( K d ) of AMP–alginate and natural zeolite–alginate were reported as 1.09 × 10 5 and 1.43 × 10 4 mL/g, respectively, indicating a higher affinity of AMP–alginate for Cs under the tested conditions. The corresponding adsorption capacities were 0.102 ± 0.001 and 0.078 ± 0.001 mmol/g, respectively. In preliminary single-pass column experiments using simulated seawater containing 20 mg/L Cs, the removal efficiencies of natural zeolite–alginate and AMP–alginate were 95% and 99%, respectively, at a flow rate of 41.6 mL/min, and 90% and 92%, respectively, at 50.0 mL/min. Material characterization using N 2 -BET, SEM–EDS, XRF, and XRD was used to examine changes in surface properties, elemental signals, and diffraction patterns following Cs exposure. The results demonstrate that both composites removed Cs from simulated seawater under the investigated conditions, with AMP–alginate exhibiting higher reported distribution coefficients and adsorption capacities. Further studies involving adsorption isotherms, quantitative selectivity analysis, and extended column experiments are required to establish the saturation capacities, competitive-ion selectivity, and long-term operational performance of these materials.
No takes yet. Share an insight, caveat, or question.
Yeh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: