Answers are grounded in this paper and cite their sources.
Multiple shale barriers alter steam chamber evolution and interbarrier heat transfer, influencing oil mobilization and recovery performance during steam-assisted gravity drainage (SAGD). Three-dimensional physical modeling and thermal reservoir simulation were integrated to investigate chamber evolution, interbarrier heating and production performance. With barriers above the injector, oil production recovered from a transient decline after steam bypass, whereas laterally positioned barriers were associated with an earlier production peak and sustained decline. At the experimental termination criterion of water cut exceeding 98%, recovery factors were 59.5% and 56.4%, respectively, for configurations differing in both barrier location and length. Temperature profiles showed that renewed chamber evolution preceded substantial barrier heating, leaving persistent low-temperature zones. Numerical results indicated that reduced barrier spacing and increased lateral extent favored heating outside the barriers, while raising lateral barriers enlarged the heated interval beneath them. The combined evidence suggests that delayed barrier heating contributed to sustained later production. By distinguishing chamber advance from heating between adjacent barriers, this work extends the interpretation of barrier effects beyond overall chamber extent and early production, providing insight into uneven heating and delayed oil recovery under the tested conditions.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: