Answers are grounded in this paper and cite their sources.
The incorporation of waste tyre rubber (WTR) into polymer composites offers a sustainable route for tyre waste valorization. This study compares WTR-reinforced epoxy (WTR/EP) and unsaturated polyester (WTR/UP) composites using Response Surface Methodology (RSM) and multi-response desirability optimization. WTR content, particle size, curing temperature and curing time were optimized simultaneously against tensile strength, flexural strength, impact strength and Shore D hardness. The optimum WTR/EP conditions were 13.48 wt.% WTR, 289.39 µm particle size, 86.26 °C and 13.03 h, yielding a desirability of 0.9591. The predicted responses were 48.954 MPa tensile strength, 81.598 MPa flexural strength, 12.443 kJ/m2 impact strength and 82.451 Shore D hardness. For WTR/UP, the optimum conditions were 13.69 wt.% WTR, 289.39 µm, 86.67 °C, and 13.03 h, with a desirability of 0.9474. The predicted responses were 45.704 MPa, 76.591 MPa, 11.474 kJ/m2 and 80.022, respectively. WTR/EP exhibited higher predicted tensile, flexural, impact and hardness values than WTR/UP. FESEM, AFM, FTIR, DSC–TGA, and water absorption analyses characterized the optimized composites. The findings demonstrate the utility of multi-response RSM for optimizing processing conditions and comparing WTR-based thermoset composites.
No takes yet. Share an insight, caveat, or question.
L et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: