Answers are grounded in this paper and cite their sources.
Achieving low-temperature growth of dense, crystalline alumina films remains a critical bottleneck for industrial cutting tool protection, as conventional high-temperature deposition induces substrate thermal softening and severe interface stress. In this study, a low-temperature (450 °C) deposition of nanocrystalline γ-Al 2 O 3 films on WC Co cemented carbide substrates was achieved utilizing bipolar high power impulse magnetron sputtering. By systematically tailoring the pulse-off time and substrate bias, the balance between discharge stability and crystallization energy was investigated. The results showed that maintaining the pulse-off time up to 125 μs promoted stable reactive sputtering and suppressed surface macroparticle formation, which is suggested to be associated with timely neutralization of accumulated target charges. Concurrently, a moderate substrate bias of -100 V appeared to provide favorable ion bombardment energy for crystalline growth without inducing severe re-sputtering defects. Under these optimum parameters, the deposited γ-Al 2 O 3 films exhibited a highly dense nano-columnar structure with a maximum hardness of 24.9 ± 1.4 GPa. Furthermore, the γ-Al 2 O 3 films exhibited stable tribological behavior with only limited material transfer from the counterparts when sliding against 45# and GCr15 steels under the tested conditions.
No takes yet. Share an insight, caveat, or question.
Yuan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: